 |
Acard's ars-2033s copy smart plus is a standalone cd/dvd backup system supporting 16x speed dvd writers. No need for a connection to a computer and no steep learning curve, just easy and quick backup of your cd/dvds in data, audio or video form. Usually to back up a lot of cd/dvds, you have to boot a computer, and execute the job via burning software and of course you have to spend time learning how to operate and repeating every step, too. In view of this, acard produced these standalone duplication systems to meet the demand. They are easy to operate, and can back up many discs at one time. Manufactured by acard, this cd/dvd duplication system includes a 9-bay case and the ars-2033s controller supporting 16x speed in full burning. This 9-bay case will hold up to 8 drives (plus the controller). The normal setup would be 1 x dvd reader and 7 dvd writers, allowing you to put 1 disc in and take 7 copies out. As an alternative a standard 3.5 Ide hard drive can be fitted inside for storing disc images. If the idea of buying 7 dvd writers seems a bit daunting, the controller will operate with less writers installed, so you can start off with 2 or 3 and add more as you need to. We have tested these duplicators with the latest pioneer and nec dvd writers, complete with the latest firmware editions, and recommend the asus dvd-rom drive for dvd reading. It is recommended that all writers used in duplicators are the same manufacturer and model. Please note: when you buy this product, you will need to buy and fit the drives to make it all work. Drives are not included.&Nbsp;installation of dvd writers into the case is very easy and only takes a few minutes. Alternatively, we offer a full build service, click here. No mounting holes are in place for use of standard 3.5 Hard drives and you will need to make your own screw holes for this or purchase the appropriate mounting brackets. Specifications:- acard atp-867 ide processor- idt cpu- 64 mb of ddr memory- 8 independent ide interface channels- 2 x 16 lcd screen- a membrane 4-button operation panel- 512 kb of flash memory for boot loader- 2mb of flash memory for copy code for more information about duplicators, visit the acard website, and follow this link for more information about what is needed to build a cd/dvd duplicator. |
